Mould Process Engineer Job Details
Vacancy has expired
Job Ref:
107724907
Industry: Engineering, Manufacturing
Region/County: Unspecified
Salary: £30000 - £32000/annum
Post Date: 01/03/2012
Job Description: CONFIDENTIAL Job Specification Mould Process Engineer Job ref: AZ/18338 Salary: - Circa £32,000 Location: West Midlands Provision of engineering support to manufacturing areas to assembly equipment for the manufacture of automotive components ensuring that equipment is introduced in line with customer and company quality requirements, and that these are maintained throughout the production life of the product. KEY TASKS * Introduction of equipment necessary for the manufacture of new projects in line with customer and company new product introduction. * Ensure that equipment is capable and meets with company philosophies for JIT, SMED, one-piece flow, Poke Yoke and KPS. * Support new projects with commissioning of new equipment * Carry out improvements to production equipment. * Ensure documentation is updated in line with company procedures. * Be and active member of team to produce process FMEA * Generating check sheet & process setting sheets. Raise equipment concerns and develop countermeasures to support initial production builds. * Knowledge of plc programming and machine performance, quality improvements * Supporting project meetings. * Assist in training operators in production issues. * Have an awareness of Health and Safety standards and legislation requirements and ensure all personnel are aware and are working within them. * Increase efficiency of cell through improvements to layout design. * Responsible for cost reduction on unit spend, and manning level reduction. * Conducting root cause problem solving and investigation. * To communicate by written and verbal means using the Company communication channels to ensure the understanding of colleagues and management. * To have an active involvement in improvement activities to support the achievement of departmental and company objectives. * To ensure that housekeeping within the area is maintained in a satisfactory condition. * To be an active member of Design and feasibility teams. * To lead or be part of improvement teams working on a wide range of projects. * Generate capexes for improvements for existing projects and control finances to meet budget. * Shop floor assembly equipment plans. QUALIFICATIONS/EXPERIENCE * A sound engineering background, preferably with a formal qualification in an Engineering discipline. * Computer literacy, including the ability to use spreadsheets and databases. * Must be fully conversant with modern engineering practices and be familiar with high volume assembly operations, preferably involving plastic parts. All third party applications will be forwarded to Listgrove Ltd Established in 1975 Listgrove provides comprehensive recruitment and human resource support to companies involved in plastics, packaging, petrochemical, environmental and energy sectors. We offer a range of services including search, selection, database search, advertising support, market research, outplacement, interim placement, psychometric testing and management assessment. For EU roles, candidates must be eligible to work and live in the European Union. Proof of eligibility will be required with your application. Member of British Plastics Federation Business Support Network Member of the Packaging Federation Appointments may be made to meet at the following exhibitions and events throughout 2012 to discuss your HR requirements: Swiss Plastics Switzerland, 17-19 January - Interplastica Russia, 24-27 January - Plastindia India, 1-6 February - Plastex Egypt, 26-29 February - Propak Vietnam, 29 February-2 March - Packaging Innovations UK, 29 February1 March - NPE USA stand 63044, 1-5 April - Plastic Japan, 11-13 April - Chinaplast China, 18-21 April - Diemould India, 19-22 April - Plast Italy, 8-12 May - Plastech Turkey, 10-13 May - Plastivision UAE, 14-17 May - Hispack Spain, 15-18 May - Packaging Innovations Germany, 23 - 24 May - Afropack Egypt, 24-26 May - Interplas Vietnam, 24-26 May - PDM, Birmingham, 29-30 May - Plastpol Poland, 29 May-1 June - Packology Italy, 11-14 June - Propak Asia Thailand, 13-16 June - Rosupack Russia, 18-22 June - Argenplas Argentina, 18-22 June - Beijing International Packaging Fair China, 3-6 July - Best of British Manufacturing Exhibition London, 24 July-9 September - Euromold Brazil, 20-24 August - Plastex Egypt, 6-9 Sept - PPMA UK, 25-27 September - Mediplas UK, 25-26 September - Composites Europe Germany, 9-11 October - Rubber and Plastics Indonesia, 10-13 October - Fakuma Germany, 16-20 October - Pack Expo International USA, 28-31 October - International Packaging Tech India, 6-8 November - JEC Americas (composites) USA, 7-9 November - Emballage France, 19-22 November - Euromould 2012 Germany, 27-30 November - Plasteurasia Turkey, 29 November-2 December
Industry: Engineering, Manufacturing
Region/County: Unspecified
Salary: £30000 - £32000/annum
Post Date: 01/03/2012
Job Description: CONFIDENTIAL Job Specification Mould Process Engineer Job ref: AZ/18338 Salary: - Circa £32,000 Location: West Midlands Provision of engineering support to manufacturing areas to assembly equipment for the manufacture of automotive components ensuring that equipment is introduced in line with customer and company quality requirements, and that these are maintained throughout the production life of the product. KEY TASKS * Introduction of equipment necessary for the manufacture of new projects in line with customer and company new product introduction. * Ensure that equipment is capable and meets with company philosophies for JIT, SMED, one-piece flow, Poke Yoke and KPS. * Support new projects with commissioning of new equipment * Carry out improvements to production equipment. * Ensure documentation is updated in line with company procedures. * Be and active member of team to produce process FMEA * Generating check sheet & process setting sheets. Raise equipment concerns and develop countermeasures to support initial production builds. * Knowledge of plc programming and machine performance, quality improvements * Supporting project meetings. * Assist in training operators in production issues. * Have an awareness of Health and Safety standards and legislation requirements and ensure all personnel are aware and are working within them. * Increase efficiency of cell through improvements to layout design. * Responsible for cost reduction on unit spend, and manning level reduction. * Conducting root cause problem solving and investigation. * To communicate by written and verbal means using the Company communication channels to ensure the understanding of colleagues and management. * To have an active involvement in improvement activities to support the achievement of departmental and company objectives. * To ensure that housekeeping within the area is maintained in a satisfactory condition. * To be an active member of Design and feasibility teams. * To lead or be part of improvement teams working on a wide range of projects. * Generate capexes for improvements for existing projects and control finances to meet budget. * Shop floor assembly equipment plans. QUALIFICATIONS/EXPERIENCE * A sound engineering background, preferably with a formal qualification in an Engineering discipline. * Computer literacy, including the ability to use spreadsheets and databases. * Must be fully conversant with modern engineering practices and be familiar with high volume assembly operations, preferably involving plastic parts. All third party applications will be forwarded to Listgrove Ltd Established in 1975 Listgrove provides comprehensive recruitment and human resource support to companies involved in plastics, packaging, petrochemical, environmental and energy sectors. We offer a range of services including search, selection, database search, advertising support, market research, outplacement, interim placement, psychometric testing and management assessment. For EU roles, candidates must be eligible to work and live in the European Union. Proof of eligibility will be required with your application. Member of British Plastics Federation Business Support Network Member of the Packaging Federation Appointments may be made to meet at the following exhibitions and events throughout 2012 to discuss your HR requirements: Swiss Plastics Switzerland, 17-19 January - Interplastica Russia, 24-27 January - Plastindia India, 1-6 February - Plastex Egypt, 26-29 February - Propak Vietnam, 29 February-2 March - Packaging Innovations UK, 29 February1 March - NPE USA stand 63044, 1-5 April - Plastic Japan, 11-13 April - Chinaplast China, 18-21 April - Diemould India, 19-22 April - Plast Italy, 8-12 May - Plastech Turkey, 10-13 May - Plastivision UAE, 14-17 May - Hispack Spain, 15-18 May - Packaging Innovations Germany, 23 - 24 May - Afropack Egypt, 24-26 May - Interplas Vietnam, 24-26 May - PDM, Birmingham, 29-30 May - Plastpol Poland, 29 May-1 June - Packology Italy, 11-14 June - Propak Asia Thailand, 13-16 June - Rosupack Russia, 18-22 June - Argenplas Argentina, 18-22 June - Beijing International Packaging Fair China, 3-6 July - Best of British Manufacturing Exhibition London, 24 July-9 September - Euromold Brazil, 20-24 August - Plastex Egypt, 6-9 Sept - PPMA UK, 25-27 September - Mediplas UK, 25-26 September - Composites Europe Germany, 9-11 October - Rubber and Plastics Indonesia, 10-13 October - Fakuma Germany, 16-20 October - Pack Expo International USA, 28-31 October - International Packaging Tech India, 6-8 November - JEC Americas (composites) USA, 7-9 November - Emballage France, 19-22 November - Euromould 2012 Germany, 27-30 November - Plasteurasia Turkey, 29 November-2 December
Featured Jobs |
Job Hunter Help |
|
|
